Products :
Seri W5 :
• Automatic power frequency detection for 50~60 Hz. No need for selection or switch.
• Automatic detection and display for power out-of-phase, SCR overheating, and fuse burn-down with one set of alarm dry contact output.
• In cases of SCR overheating or fuse burn-down, the system output is stopped immediately. Once the malfunction is eliminated and power is restored, the system will buffer the output to prevent the fuse burn-down.
• 4~20mA, 1~5VDC, 2~10VDC, 0~20mA, 0~5 VDC, 0~10VDC, dry contact points, etc. and all control signals are ready to use.
• Triggering circuit and the main board are designed separately to avoid the main board damage when main circuit malfunctions.
• Using European detachable control signal connector for easy replacement without re-wiring installation.
Seri WS :
• The compact design of S series needs no auxiliary power source and comes in simple wring so that it can be controlled by just 4-20mA input.
• Unique design that incorporates fixing by DIN35 guiderail, allowing easy installation, removal and moving.
• Dual SCR architecture, highly voltage and current withstanding, free from any interference to excel all average TRIACs.
• Includes protection and indication of over-temperature output stopping.
• Large heat dissipating area, sufficient capacity.
• Design of single specification providing wide range of application from 180 to 480VAC.
Seri SCR :
• The compact design of S series needs no auxiliary power source and comes in simple wring so that it can be controlled by just 4-20mA input.
• Unique design that incorporates fixing by DIN35 guiderail, allowing easy installation, removal and moving.
• Dual SCR architecture, highly voltage and current withstanding, free from any interference to excel all average TRIACs.
• Includes protection and indication of over-temperature output stopping.
• Large heat dissipating area, sufficient capacity.
• Design of single specification providing wide range of application from 180 to 480VAC.
Seri SSR :
• S series with ingenious design, small dimension, big cooling area, sufficient capacity .
• Special design DIN35 orbit fixed, easy for installation, dismantling, moving.
• Double SCR design, high withstand voltage, high withstand current, no electrical interference.
• Stop output in case for over temperature that is for protecting SCR and instruction function.
• Single speciation design with wide useful range from 24VAC to 480VAC.
Solid State Relay :
• High Reliability by S.M.T. & TQC. ( Surface Mounting Technology )
• High lsolation over than 50MΩ / 500VDC
• High Dielectric over than 2.5KV
• Low Enable Current less than 7.5mA / 12VDC C MOSIC or TTL Compatible.
• Low EMI / EFI & Surge by Zero Cross Trigger Method.
• High Surge Current Duration Over 10 Times of Rated Current / One Cycle
• High Surge Voltage Duration by Snubber Circuit.
Single Phase, Seri SSR
Three Phase, Seri SSR
Solid State Relay
Etc.
W5TP4V720-24J / W5SP4V720-24J
W5TP4V580-24J / W5SP4V580-24J
W5TP4V450-24J / W5SP4V450-24J
W5TP4V380-24J / W5SP4V380-24J
W5TP4V300-24J / W5SP4V300-24J
W5TP4V230-24J / W5SP4V230-24J
W5TP4V180-24J / W5SP4V180-24J
W5TP4V150-24J / W5SP4V150-24J
W5TP4V125-24J / W5SP4V125-24J
W5TP4V100-24J / W5SP4V100-24J
W5TP4V080-24J / W5SP4V080-24J
W5TP4V060-24J / W5SP4V060-24J
W5TP4V045-24J / W5SP4V045-24J
W5TP4V030-24J / W5SP4V030-24J
Etc...
